Ver
sion:
M
P4/
6 G
3
08/
01
/2024
18
3.
Installation Manual
3.1.
Safety
•
The boiler must not be used for direct heating of drinking water.
•
The boiler may only be installed indoors.
•
In cases where the instructions in this manual violate national regulations,
the latter must be followed.
•
Don’t forget to install the touch protection after installation. The touch protection
protects the user from electrical injuries and the electrical installation from being
splashed with water.
•
The illustration showing the pipe system on page 20 is a outline diagram.
Design the pipe system in accordance with current regulations and standards.
3.2.
Installation
3.2.1.
Installation overview
1.
Prepare accessories and installation materials that are not included in the boiler
delivery.
2.
Install the boiler.
3.
Install the pipe system.
4.
Fill with water.
5.
Install the electricity.
6.
Test the boiler in accordance with the Installation engineer’s checklist on page 30.
7.
Demonstrate the boiler to the customer.
8.
Fill in the installation engineer’s notes for the user.
9.
Register the boiler and the warranty.
3.2.2.
Preparations
In addition to the boiler, you will need:
-
Shut-off and throttle valves (for large systems or when the boiler is not the highest point).
-
Filling and drain valve.
-
Installation materials.
Water quality
If the water’s values deviate from the recommended values, you must adjust the values
or use an alternative water source.
If the water deviates from the recommended levels, it can cause corrosion or lime
deposits, which will shorten the service life of the boiler by several years.
Hard water can give rise to lime deposits. Very soft water may cause corrosion.