T
ROUBLESHOOTING
AND
M
AINTENANCE
A
02.9661.0001 K
09-Apr-03
77
Note:
The lenticular style glass requires calibration and must be installed in the orientation described
in next step. The glass holder magnet is calibrated at the sensor for a RLens channel value of zero.
Orienting the lens properly will achieve the same beam pattern from luminaire to luminaire.
Step 4. (
Lenticular Glass Only
) For lenticular style glass, align center of large notch in glass with
glass holder magnet. (Use metal object or screwdriver to assist in locating magnet, if
necessary.)
Figure A-3: Glass Alignment
Step 5. Seat bottom portion of glass in glass holder and gently work fingers around glass,
progressively seating it into holder.
Note:
If there are problems with the lens fit, apply a small amount of Versilube to the nose ring pad.
Step 6. Close and latch front ring assembly.
Magnet
Glass Holder
Glass
Notch
Lenticular Glass
Orientation
