M
ENU
S
YSTEM
: M
APPING
4
02.9661.0001 K
09-Apr-03
55
ON
On Indefinitely
Sets Menu Display to stay on until programmed otherwise (
DisP
) or turns
on a function.
P UP
Lamp Power Up
Accesses options for lamp power up: on, off, or after calibration.
P/T
Pan/Tilt
Accesses pan and tilt options for DMX function, system configuration, and
testing.
Pan
Pan
Specifies pan function for manual control (
Man
) or pan encoder for testing
(
Test
).
PASS
Test Pass
Indicates that sensor test has passed.
PCue
Play Cue
Accesses cue list for play back of cues by number.
POWR
Lamp Power
Accesses function to turn lamp on or off.
PSEQ
Play Sequence
Plays back cue sequence. Press [Enter] to start and [Menu] to stop.
RDef
Reset Default
Resets default system configuration values.
RHrs
Reset Lamp Info
Resets lamp hour and lamp strike counters. For use when new lamp is
installed.
RLen
Rotating Lens
Specifies rotating lens for manual control (
Man
) or rotating lens sensor for
testing (
Test
).
RTST
Run-Test
Indicates that a system mechanism test is in progress.
SCR
Source Parame-
ters
Accesses incandescent lamp source voltage input/output and current out-
put information.
Sens
Sensors
Accesses sensor choices for diagnostic testing.
SEQ
Sequence Play-
back
Sets sequence playback mode to Individual (plays cues from each lumi-
naire) or Master (all luminaires play same cue).
STAT
Status/Error Dis-
play
Allows scrolling through error list or displays
OK
if no errors.
Stor
Store Cue
Stores cue by number. Cue number stored is dependent on next cue ID in
cue list since this field is not editable.
Strb
Strobe
Specifies strobe function for manual control.
Strk
Strike
Displays total number of lamp strikes.
STST
Sensor Test
Indicates that a system sensor test is in progress.
SWAP
Swap
Swaps pan and tilt functions for special focus requirements such as moving
mirror mechanisms.
Test
System Tests
Accesses diagnostic tests for internal mechanisms.
Tilt
Tilt
Specifies tilt function for manual control (
Man
) or tilt encoder for testing
(
Test
).
Time
Timing Data
Allows manual setting of timing values for dimmer/intensity, focus, color,
and beam.
Ver
Version
Displays current software version (in two pages).
VIn
Voltage IN
Indicates voltage input for incandescent models.
VOut
Voltage OUT
Indicates voltage output for incandescent models.
Display
Definition
Purpose
