Vari Lite VL2416 User Manual Download

Page: 79 / 99

ENU

YSTEM

: S

ELF

ESTS

02.9661.0001 K

09-Apr-03

Movement Disable

The

Movement

option allows pan and tilt to be disabled so that the luminaire can be placed in any

position for testing without movement occurring. In order to regain full control of the luminaire,

Movement

will need to be enabled after testing.

Note:

When using the

Movement

option, pan and tilt will be disabled for all the luminaires that are

linked.

To set movement option:

Step 1. Press [Menu].
Step 2. Press [Up] / [Down] arrows until

Config

appears. Press [Enter].

Step 3. Press [Up] / [Down] arrows until

Pan/Tilt

appears. Press [Enter].

Step 4.

Movement

will be displayed. Press [Enter].

Step 5. Use [Up] / [Down] arrows to select

Enable

Disable

. Press [Enter] to select.

Summary of Contents for VL2416




































































































Search results

Summary of Contents for VL2416

Reviews:

Related manuals for VL2416

Brands by name

Popular brands

Vari Lite VL2416, User Manual

Search results

Summary of Contents for VL2416

Reviews:

Related manuals for VL2416

Brands by name

Popular brands