M
ENU
S
YSTEM
: C
UES
AND
S
EQUENCES
4
02.9661.0001 K
09-Apr-03
59
To change the follow time in a sequence:
The follow time is stored for each cue individually.
Step 1. Select cue to be changed from
PCue
.
Step 2. Go to
Mod
to modify active cue and press [Enter] to save the change.
Step 3. Set
FLTM
(Follow Time) to desired value (refer to
“Set follow time between cues:” on
).
To delete a sequence and all cues:
Step 1. Press [Menu].
Step 2. Press [Up] / [Down] arrows until
Cue
appears. Press [Enter].
Step 3. Press [Up] / [Down] arrows until
DSEQ
appears. Press [Enter].
Step 4.
OK?
prompt will appear. Press [Enter] to delete stored sequence.
Choose Sequence Mode:
MSEQ
will replay the cues from the master luminaire.
ISEQ
will play the cues from each individual luminaire, if any. In
ISEQ,
if the number of cues is
different, it will only play as many as each luminaire has stored. The follow time is taken from the
master luminaire.
Step 1. Press [Menu].
Step 2. Press [Up] / [Down] arrows until
Cue
appears. Press [Enter].
Step 3. Press [Up] / [Down] arrows until
SEQ
appears. Press [Enter].
Step 4. Press [Up] / [Down] arrows to toggle between
ISEQ
and
MSEQ
. Press [Enter] to select
mode.
To make a sequence AutoPlay at power up:
Step 1. Press [Menu].
Step 2. Press [Up] / [Down] arrows until
Cue
appears. Press [Enter].
Step 3. Press [Up] / [Down] arrows until
Auto
appears. Press [Enter].
Step 4. Use [Up] / [Down] arrows to toggle between
OFF
(the default) and
ON
. Press [Enter] to
select the mode.
To store cues from a console:
Step 1. Clear memory by deleting cues or sequence, if required.
Step 2. Recall cue at the console.
Step 3. From
Cue
menu, set
FLTM
, then at
Stor
store cue. If each luminaire has separate data then
store each cue into each luminaire. The sequence mode to use in this case would be
ISEQ
.
