T
ROUBLESHOOTING
AND
M
AINTENANCE
A
02.9661.0001 K
09-Apr-03
71
Troubleshooting Guide
If a problem is suspected, first try recalibrating the luminaire to prompt an error message. The chart
below provides possible causes and remedies for various error messages and/or symptoms.
CAUTION:
Some troubleshooting is included for reference only. Performing remedies marked by
gray areas will void product warranty. Refer to the Vari-Lite Limited Warranty card included with the
product.
TILT / NO / SENS
Tilt Sensor Not Found
TILT / SENS / ACTV
Tilt Sensor Always Active
WAIT
Retrieving Current Status
WRNG / SW / PROG
Wrong Software Program
Table A-2: Troubleshooting Guide
Error Display
Description
Possible Cause and Remedy
B2M1
RLen
NoSn
Aux Board 2, Motor 1,
Rotating Lens,
Sensor Not Found
Rotating lens power not connected, motor not moving
- Connect motor power at motor
- Rotating lens sensor not connected
- Connect sensor
Rotating lens movement restricted or impeded
- Remove obstruction
Rotating lens sensor is faulty
- Replace sensor assembly
Aux Board 2 is faulty
- Replace aux board
B2M1
RLen
SAct
Aux Board 2, Motor 1,
Rotating Lens,
Sensor Always Active
Rotating lens power not connected and lens aligned
with sensor
- Connect rotating lens power at motor
BRD1
NO
COMM
Aux Board 1 Communication
Failure
Aux input connector (J5) not connected to either aux
board
- Connect aux input connector (J5) to either aux
board
Jumper/bridge connector (J1) between aux boards
not connected
- Install jumper/bridge connector (J1) between aux
boards
Table A-1: Error Messages (Continued)
Display
Message...
