Varec 2920, Installation And Operation Manual, Page: 80 / 194

2920 Float & Tape Transmitter 5 Display and Configuration Interface
70 Installation and Operations Manual
AdvHighLevel This value indicates the point at which the High Alarm
Level should be activated. When the incoming value
rises above this point the alarm is activated and de-
activated when the value is below this point.
CritHighLevel This value indicates the point at which the Critical High
Level alarm should be activated. When the incoming
value rises above this point the alarm is activated and
de-activated when the value is below this point.
LDeadband
Manual Level Manual level allows the user to enter a manual level
value, if the Level Reference is undefined.
CritLowTemp This value indicates the point at which the Critical Low
Temperature alarm should be activated. When the
incomming value falls below this point the alarm is
activated and de-activated when the value is above this
point.
AdvLowTemp This value indicates the point at which the Low Alarm
Temperature should be activated. When the incoming
value falls below this point the alarm is activated and
de-activated when the value is above this point.
AdvHighTemp This value indicates the point at which the High Alarm
Temperature should be activated. When the incoming
value rises above this point the alarm is activated and
de-activated when the value is below this point.
CritHighTemp This value indicates the point at which the Critical High
Temperature alarm should be activated. When the
incoming value rises above this point the alarm is
activated and de-activated when the value is below this
point.
TDeadband A floating-point value used to determine change in
temperature alarm state. The temperature value must
be above Low Temp set points and below high Temp set
points by this amount for the alarm condition to clear.
The parameter must be set in current Temp units.
ManTemp A floating-point value representing a manual
temperature value. This parameter is valid if the
Temperature Reference is undefined.
TempOffset A floating point value to add a linear (positive or
negative) offset to the measured temperature value.
All Params Lists all Display and Config Params in a list.