117
en
fr
es
it
nl
de
9. H YGIEN E
Push the lower Screen upwards out of
the Filling Chamber Housing.
9.4.4. Drying
All component parts of the Filling
Chamber must be completely dry be-
fore reassembly.
Put all component parts of the Filling
Chamber on a clean, dry, and absor-
bent pad and allow them to dry thor-
oughly. A hair dryer may be used for
faster drying. Do not dry in wet rooms
(e.g. not in the bathroom).
Lower Screen
Filling Chamber
Cylinder
Filling
Chamber
Housing
Push the lower Screen out
9.4.5. Assembly of the Filling
Chamber Cap
Assemble the components in the re-
verse order:
Slide the cap cylinder into the cap
housing until it clicks, then pull the cap
ring from above over the cap cylinder
to the cap housing.
When using hemp flowers, push the
upper Screen from below into the cap
cylinder until it clicks into the desig-
nated notch.
When using dronabinol solution, the
two Screens are not needed. Only the
Drip Pad is inserted instead of the
lower Screen.
Cap Ring
Cap Housing
Cap Cylinder
Upper Screen
Touch Guard
Summary of Contents for Volcano MEDIC 2
Page 2: ......
Page 69: ...69 de en fr es it nl...
