V-301G Series Operating Instructions Ver. 2.01E
7
Parts Name
Sales Unit
Maintenance Parts Kit
Ribbon heating element (5mm or 10mm)
10 pcs/set
Choice of heating element:
· 5mm ribbon heating element
…
3 pcs.
· 10mm ribbon heating element
…
3 pcs.
· Braided heating element
…
2 pcs.
Braided heating element
5 pcs/set
Fluoro glass sheet
2 sheets
2 sheets
Glass tape W13mm x 5M roll
1 roll
—————
Glass tape W13mm x 10M roll
1 roll
—————
Glass tape W25mm x 5M roll
1 roll
1 roll
Glass tape W25mm x 10M roll
1 roll
—————
Silicone rubber (white)
2 pcs.
1 pc.
Filter element
3 pcs.
2 pcs.
Sarcon sheet
2 pcs. (13mm×320mm)
1pc. (13mm×320mm)
Routine maintenance parts, which will need to be replaced after extensive use, are sold individually as
detailed below. Also the maintenance parts kits that includes all the consumable parts are available.
Replacement parts can be purchased through
Van der Stahl Scientific.
1
The impulse sealer is a machine which sends strong electric current quickly to the thin ribbon heater,
which presses against the film and instantly heat seals the package. Though this machine yields
superior quality sealing, it is not compatible with films thicker than that indicated in the diagram
below, sponge-like sheets, and materials which are not able to withstand high heat.
2
Film thickness limits for the V-301G series are described below. The machine cannot seal bags
which are thicker than that indicated. The machine may malfunction if you try to exceed the limits
of the machine.
Heating method
Model
Heater width
Film thickness
7RWDOWKLFNQHVVRIRYHUODSSLQJ¿OPV
Single side heating
V-301G
5mm
0.3mm or less
Single side heating
V-301G
10mm
0.4mm or less
Double side heating
V-301G-10DK
10mm
0.5mm or less
3 Replacement parts
4 Proper use of the sealer
Attention
V-301G and V-301G-10DK use different parts. When you order the parts, please specify the model name.