6
V-301G Series Operating Instructions Ver. 2.01E
These illustrations are not reduced equally.
Code
A type
B type
Model name
V-301G
V-301G-10DK
Power
AC 110V or 220V 50/60Hz
AC 110V or 220V 50/60Hz
Power consumption
1,050W for 10mm-width heating element
560W for 5mm-width heating element
1,050W
Machine weight
18 kg
Seal dimensions
Effective seal
Effective seal length: 300mm
Effective seal width
10mm (When 10mm-widht heating element is installed.)
5mm (When 5mm-widht heating element is installed.)
10mm
Heat timer
Dial 1~10 (= 0.1~2.3 seconds)
Vacuum pump
Exhaust speed
10L/min
Ultimate vacuum
-58.6 kPa / 320 torr (Acheived vacuuming rate)
Vacuum and gas tmer
OFF/ Dial 1 ~ 9 (=0.1~20 seconds) / MANUAL (=continuous mode)
Machine dimensions
W 370m m x D 400mm x H 390 mm
NOTE) The exhaust speed and ultimate vacuum represent stand-alone values, before installation to the machine.
The 0 torr of the ultimate vacuum is 0 Pa.
※
Width of braided heating element is not stable. Seal width may vary between each braided heating element.
Model Name
V-301G
V-301G-10DK
5mm-width ribbon heating element
5 pcs.
-
10mm-width ribbon heating element
5 pcs.
2 pcs.
Braided heating element
-
2 pcs.
Please make sure that all of the accessories described below are included.
If not, please contact your dealer.
1 Specification
2 Package contents
Table
···1 ea
Low pressure rubber hose (3M)
···1 ea
Hose band
···1 ea
Ribbon heating element
Braided heating element
Philips screwdriver
···1 ea
Fexagonal wrench 3mm
···1 ea
Filter element
···1 ea