22
V-301G Series Operating Instructions Ver. 2.01E
Control panel setting
Operation Procedures
Reference
1
Set a heating timer from 1 to 10 depending on the required heat time.
8-6-1 Setting the heating timer
2
Set a pouch to the seal area. A vacuum nozzle must be in the back position.
8-8 Place a pouch to the seal area
3
Push down on a table completely down.
8-9 Press down the table
8-11 Press the table further down to seal
4
7DNHVXI¿FLHQWFRROLQJWLPH
7DNHVXI¿FLHQWFRROLQJWLPH
5
Sealing is complete.
7KH¿QLVKHGVHDO
9-2 Detail of work procedures
9-2-1 <<Seal only operation>>
Heating timer dial (1~10)