ZoomSHOT 30 Fixed Camera with QUSB, QMini, QDVI System or for AV Bridge MATRIX PRO
Page 36 of 73
QUSB Screen Shot: Admin Menu - Streaming Page
1) Streaming Mode
: Streaming can be set for either USB 2.0 streaming (MJPEG) or IP streaming (H.264); but
not both at the same time. The QUSB can stream USB and accept IP control, or it can IP stream with IP control.
Choose the streaming mode here.
2) USB Device Name:
Allows the user to use a “friendly name” per system. In a BYOD format, the user has the
ability to move between different UC conference rooms and have the ability to assign the PC’s USB resources
to that room.
3) Color Space
: The UVC drivers will negotiate the color depth, but this parameter allows the user to reduce the
color depth to 4:2:0, which is used with the older/cheaper webcams and applications, where image quality is
not as critical. The 4:2:2 color is used by many applications that take advantage of the performance of the
camera where the colors are more vibrant and precise.
4) IP Streaming Settings:
The Video Settings allow the selection of the target performance for the IP Streaming.
The QUSB is set up for a variable bit rate and the user can select the video resolution and the quality, such as
High Quality (Best), Standard Quality (Better) and Low Bandwidth (Good). Every effort to eliminate
stupefyingly
bad combinations
with the 5 or 6 parameters that make up the image size, quality, bit rate, bandwidth etc… has
been made, so you can’t pick 1080p at a bit rate of 128Kbps, which would look totally wicked awful - and
probably wouldn’t work anyway.
5) Streaming Protocol and URL
: Admin chooses the streaming type and the port number for RTSP. The HLS
port is always on 80. The supported protocols are RTSP and HLS (Apple’s HTTP Live Streaming). RTSP is
best for live applications, where HLS serves the Apple iOS devices and is better for playback due to the amount
of buffering the HLS has built-in. The Streaming URL auto-populates and that path can be changed.
When finished setting up the streaming parameters, click Save to put the changes into effect or cancel, which will
not save the configuration.
➊
➍
➌
➋
➎
