ZoomSHOT 30 Fixed Camera with QUSB, QMini, QDVI System or for AV Bridge MATRIX PRO
Page 16 of 73
Q
UICK
-C
ONNECT
USB
M
INI
Front Panel with Feature Call-outs
1) USB Port:
USB Type-B port for connectivity to streaming or capture computer.
2) Power LED
: Indicates presence of 24 VDC power for the Quick-Connect.
The USB Mini will automatically show up as a native USB 2.0 device on the connected computer. If not prompted
to allow the device as your primary UVC video source, it may be required to configure it as such in the operating
system of the streaming/capture computer.
USB Mini Top Panel Connections
1) Power Connector:
5.5mm x 2.5mm coaxial power jack for use with provided 24 VDC, 2.08 Amp switching
power supply.
2) Mode Switch:
White-capped, recessed, momentary tactile push button for switching between USB Streaming
and Web Control (Ethernet over USB) modes, as well as a Factory Reset mode.
Important configuration and operating note:
a. The USB Mini interface will boot up in UVC streaming video mode. A quick momentary touch will switch
to web control mode and video will no longer pass. This allows the administrator to set up the USB Mini
with the embedded web pages and when the administrator is finished, toggle back to UVC streaming
mode for the end user. It is highly unlikely that the end user will ever need access to the configuration
web pages during use of the USB Mini.
b. For resetting the USB Mini back to factory defaults, push and hold this switch in for approximately 5.0
seconds. The front panel blue LED will blink indicating the reset to factory defaults.
3) EZ-POWER VIDEO RJ-45 (Color-Coded Orange):
Simultaneously sends power to the camera to and returns
HSDS (differential) video from the camera which
is used to generate USB 2.0 (UVC) video for the connected
PC.
4) RS-232 Jack (Color-Coded Blue):
RJ-45 control port for sending serial control to the camera. This must be
connected to the camera’s RS-232 port in order for the Quick-Connect USB Mini to auto-recognize and auto
load the correct Vaddio camera control protocols.
5) Mounting Flange:
The
mounting flange is provided for surface mounting the USB Mini (under table or in other
clever spots) and for easy access to the USB connection for BYOD laptop or computer.
➋
➊
Side VIEW
➌
➎
➍
➊
➋
