ZoomSHOT 30 Fixed Camera with QUSB, QMini, QDVI System or for AV Bridge MATRIX PRO
Page 15 of 73
Rear Panel with Feature Call-outs
1) Power Input:
5.5mm x 2.5mm coaxial power jack for use with provided 24 VDC, 2.08 Amp switching power supply. The
Quick-Connect USB supplies power to the attached camera.
2) 5-Position DIP Switch:
A 5-position dip switch allows the user to choose the HD video color space (YCbCr for HDMI and
sRGB color space for DVI-D) on the HDMI output, configure for updates, and restore factory defaults when cycling power.
Table: Quick Connect USB Rear Panel Dip Switch Settings
3) RS-232 IN (Color-Coded Grey):
Serial RS-232 input on an RJ-45 connector. This control port allows a Vaddio joystick
controller or 3
rd
party controller (Crestron, Extron, AMX) to control the camera functions if the embedded web interface is
not used for real time control.
4) RS-232 OUT TO CAMERA (Color-Coded Blue):
Serial RS-232 output on RJ-45 connects via Cat-5 to the camera RS-
232 input
5) EZ-POWER VIDEO port (Color-Coded Orange):
The QUSB will automatically show up as a native USB 2.0 device on
the connected computer. If not prompted to allow the device as your primary UVC video source, it may be required to
configure it as such in the operating system of the streaming/capture computer.
6) YPbPr Output:
Analog component video output on a DE-15 (HD15) connector (resolution is set on the back of the camera).
The YPbPr output resolution will be the same as the HDMI output resolution. SD video resolution (Y/C and CVBS formats)
are not supported by the Quick-Connect USB interface; however, some progressive frame analog component SD video is
supported.
7) HDMI Output:
The digital video output on the HDMI connector can either be YCbCr color space (normal HDMI mode) or
can be changed to DVI-D color space (sRGB) for older monitors and devices. The HDMI and YPbPr outputs work
simultaneously and are the same resolution (set at the camera).
8) Ethernet 10/100 Network RJ-45 Jack:
The Ethernet jack with have yellow and green lights to indicate connectivity and
activity of the network on that jack. The Ethernet jack will stream video up to 1080p/30 (H.264) and can be set from the
internal web page. The resolutions are available in a three (3) stage quality format (High Quality, Good Quality, and
Standard Quality targets) and includes a range of CIF to 1080p/30.
9) USB 2.0 Connector:
The USB 2.0 is on a Type-B female jack and connects to a PC running a soft-client video conference
system or video capture software that uses UVC (USB Video Class) standard drivers. No other USB 2.0 drivers are required
to plug the QUSB into a computer and have it work. The UVC drivers will auto-negotiate the top resolution that the computer,
program, and QUSB can accomplish together and auto-implement that resolution.
DIP Switch
Function
Default
Activation
1
Future Use
Up
n/a
2
Future Use
Up
n/a
3
Color Space HDMI Connector
Up = HDMI (YCbCr)
Down = DVI (sRGB)
4
Program / Update
UP = No Program
DOWN = Ready To Program
5
Future Use
Up
n/a
All Down
Reset to Defaults
All UP
ALL DOWN (with power cycle)
➌
➍
➊
➋
➎
5 - Position
DIP Switch
➏
➐
➑
➒
