ZoomSHOT 30 Fixed Camera with QUSB, QMini, QDVI System or for AV Bridge MATRIX PRO
Page 30 of 73
Q
UICK
-C
ONNECT
USB
I
NTERNAL
W
EB
P
AGES AND
C
ONTROL
The internal web pages will allow control of the Quick-Connect USB and control of the attached camera via a
network connection. These web pages will allow the user or administrator to set security passwords, change the
IP address, view diagnostics, access the firmware upgrade page and more!
DHCP IP Set-up (Dynamic Host Configuration Protocol):
If the LAN has a DHCP (dynamic host configuration protocol) server, then the IP address, gateway and
routing information will automatically be assigned. The QUSB firmware is defaulted to DHCP and will
attempt to dynamically obtain an IP address using DHCP, but it will fall back to the default address of
169.254.1.1
if no DHCP server can be found.
Static IP Set-up:
The static IP can be assigned either through the network or directly with a computer using a network cable
(depending on the age of the computer, you may need a cross-over network cable). Either way the steps
are the same for network or direct connection to a computer. The default address of the QUSB camera is
169.254.1.1
and the Subnet mask is
255.255.0.0
. Different computer OS types all have their own way of
doing things (without question), but they are essentially doing the same stuff, changing the IP address so
the web pages of the QUSB are accessible.
Quick-Connect USB Web Pages Tour
QUSB Screen Shot: Login
The QUSB web interface is intend
ed as a user’s camera control page at one level, and an administrator’s
management tool at another level, which requires password authentication for access.
The Login Page will appear if there is a user password assigned by the administrator. Assigning a user password
can limit access to camera controls to only trusted users. The administrator can set the password for the user
account (whose Username will be ‘user’) from the admin interface. If no user password is assigned, the web page
will automatically open to the Camera Control page.
Admin access has the following default credentials:
Username: admin
Password: password
