DEVICENET OPTION BOARD LAYOUT AND CONNECTIONS
vacon • 9
24-hour s358 (0)40 837 1150 • Email: [email protected]
4.3
Connection of DeviceNet drop-line cable
The following instructions lead you through the connection of the OPTC7 to the Devicenet system and
show you the power-up and grounding of the board.
A
Lead the DeviceNet drop-line cable through the right gridded hole on the bottom of
the Vacon NX frequency converter. Make a sufficiently wide opening for the cable by
cutting the grid as wide as necessary (see step E on page 12)
B
Connect the 4 coloured wires into the bus connector in the following order from the
left: black, blue, NONE, white, red.
BK
BL
W
R
BK BL W R
Summary of Contents for NX OPTC7
Page 1: ...vacon nx ac drives optc7 devicenet option board user manual ...
Page 51: ......
