Vacon NX OPTC7, User Manual

Page: 4 / 52

4 • vacon DEVICENET OPTION BOARD TECHNICAL DATA
2. DEVICENET OPTION BOARD TECHNICAL DATA
2.1 General
DeviceNet
connections Interface Pluggable connector (5.08mm)
Data transfer method CAN
Transfer cable
2 wire twisted shielded cable with 2 wire bus power
cable and drain
Electrical isolation 500 VDC
Communications ODVA 2.0
Compliant
Baud rate 125, 250 and 500 kbaud
Product code 0x02 (2)
Product Type 0x02 (AC Drive)
Vendor ID 0 x 1BB (Vacon)
Electrical DeviceNet
Other
Network supply voltage:
11…25V DC
Network input current:
28 mA typical, 125 mA inrush (24V DC)
All other power derived from VACON inverter power supply
Environment Ambient operating
temperature
–10°C…55°C
Storing temperature –40°C…60°C
Humidity <95%, no condensation allowed
Altitude Max. 1000 m
Vibration 0.5 G at 9…200 Hz
Safety Fulfils EN50178 standard
Table 2-1. DeviceNet technical data
2.2 DeviceNet features and functionality
Network size
Up to 64 nodes
Network length
Selectable end-to-end network distance varies with speed
Baud rate Distance
125 Kbps 500 m
250 Kbps 250 m
500 Kbps 100 m
Data packets 0-8 bytes
Bus topology Linear (trunkline/dropline); power and signal on the same network cable
Bus addressing Peer-to-peer with Multi-Cast (one-to-many); Multi-Master and Master/Slave
special case; polled or change-of-state (exception-based)
System features Removal and replacement of devices from the network under power
Table 2-2. DeviceNet features and functionality