Vacon NX OPTC7, User Manual

Page: 16 / 52

16 • vacon COMMISSIONING
# Name Default Range Description
1 MAC ID 63 0…63
2 BAUD RATE 125 kBaud 1 - 125 kBaud
2 - 250 kBaud
3 - 500 kBaud Communication speed in baud
Note! If the value of this parameter is
changed, the new value will be valid after
the next power-up.
3 I/O POLL TYPE 21/71 1 – 20/70
2 – 21/71
3 – 23/73
4 – 25/75
5 – 101/107
Table 6-1. DeviceNet parameters
Note!
• Every device that is connected to the bus must have an individual MAC ID
• Before the values of these parameters can be changed, the drive must be in STOP-mode and
the communication power supply must be connected
DeviceNet status
To see the present status of the DeviceNet Fieldbus, enter the
Devicenet Status
page from
Monitor
menu (G7.5.2)
. See Figure 6-2 and Table 6-2 below.
Figure 6-2. DeviceNet status
DeviceNet status
0 Non-existent or no bus power
1 Configuring state
3 Established
4 Time out
Table 6-2. DeviceNet status indications