8
vacon • 100
Options
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
7
•
Connect the GROUND wire to the proper terminal (see the yellow-green cable
on Figure 68.
8
•
Connect the cables from the potentiometer and from the selector to the I/O
control terminals. The cables have to be connected to the I/O terminals as
shown in the Figure 68 and in the Table 40.
9
•
RED, BLUE and BLACK wires are signals from the potentiometer.
10
•
YELLOW, WHITE and GREY wires are signal from the selector switch.
Table 40. Control I/O terminal signal connections to the simple operator panel.
Standard I/O terminals
Terminal
Signal
A
RS485_A
Serial bus, negative
B
RS485_B
Serial bus, positive
1
+10 Vref
Reference output
2
AI1+
Analogue input,
voltage or current
3
GND
I/O signal ground
6
24Vout
24V aux. voltage
7
DIN COM
Digital inputs com-
mon
8
DI1
Digital input 1
9
DI2
Digital input 2
10
DI3
Digital input 3
4
AI2+
Analogue input,
voltage or current
5
GND
I/O signal ground
13
DO1-
Digital output 1 com-
mon
14
DI4
Digital input 4
15
DI5
Digital input 5
16
DI6
Digital input 6
18
AO1+
Analogue signal
(+output)
20
DO1+
Digital output 1
Function
Description
Wire colors
Terminal
Potentiometer
10V reference output
RED wire
1
AI1+
BLUE wire
2
AI1-
BLACK wire
3
Table 41. Simple operator panel connection description.
YELLOW
WHITE WIRE
GREY WIRE
RED WIRE
BLUE WIRE
BLACK WIRE
