Vacon 20 CP/X, Applications Manual

Page: 86 / 92

vacon • 83 Fault tracing
5
100 Option board configuration error
Check contact in option board
slot
Try to reduce ambient noise;
Should the fault re-occur, con-
tact the distributor near to you.
101 Modbus buffer overflow
Check Modbus specifications
for time-out.
Check cable length.
Reduce ambient noise.
Check baudrate.
104 Option board channel full
Check contacts in option board
slot.
Try to reduce ambient noise.
Should the fault re-occur, con-
tact the distributor near to you.
105
Option board memory allocation
fail
Check contacts in option board
slot.
Try to reduce ambient noise.
Should the fault re-occur, con-
tact the distributor near to you.
106 Option board Object queue full
Check contacts in option board
slot.
Try to reduce ambient noise.
Should the fault re-occur, con-
tact the distributor near to you.
8
System Fault 107 Option board HMI queue full
Check contacts in option board
slot.
Try to reduce ambient noise.
Should the fault re-occur, con-
tact the distributor near to you.
108 Option board SPI queue full
Check contacts in option board
slot.
Try to reduce ambient noise.
Should the fault re-occur, con-
tact the distributor near to you.
111 Parameter copy error
Check if parameter set is com-
patible with drive.
Do not remove Keypad until
copy is finished.
113
Frequency detective timer over-
flow
Check keypad contacts.
Try to reduce ambient noise.
Should the fault re-occur, con-
tact the distributor near to you.
114 PC control time out fault
Do not close Vacon Live when
PC control is active.
Check PC-Drive cable.
Try to reduce ambient noise.
115 DeviceProperty data format
Reset the fault and restart.
Should the fault re-occur, con-
tact the distributor near to you.
Fault
code
Fault name Subcode Possible cause Remedy
Table 29. Fault codes and descriptions.