6.5
Installation of a battery for the Real Time Clock (RTC)
105
6.6
Galvanic isolation barriers
105
7 Commissioning and additional instructions
107
7.1
Commissioning safety
107
7.2
Commissioning of the drive
107
7.3
Operation of the motor
108
7.3.1
Checks before starting the motor
108
7.4
Measuring the cable and motor insulation
108
7.5
Installation in a marine environment
109
7.6
Installation in an IT system
109
7.6.1
The EMC jumper in MR4, MR5 and MR6
109
7.6.2
The EMC jumper in MR7
112
7.6.3
The EMC jumper in MR8
114
7.6.4
The EMC jumper in MR9
115
7.7
Maintenance
116
8 Technical data, Vacon
®
100
118
8.1
AC drive power ratings
118
8.1.1
Mains voltage 208-240 V
118
8.1.2
Mains voltage 380-500 V
120
8.1.3
Mains voltage 525-600 V
121
8.1.4
Mains voltage 525-690 V
122
8.1.5
Overload capability
122
8.1.6
Brake resistor ratings
123
8.2
Vacon
®
100 - technical data
128
9 Technical data, Vacon
®
100 FLOW
133
9.1
AC drive power ratings
133
9.1.1
Mains voltage 208-240 V
133
9.1.2
Mains voltage 380-500 V
135
9.1.3
Mains voltage 525-600 V
136
9.1.4
Mains voltage 525-690 V
137
9.1.5
Overload capability
137
9.2
Vacon
®
100 FLOW - technical data
139
10 Technical data, Vacon® 100 HVAC
144
10.1 AC drive power ratings
144
10.1.1
Mains voltage 208-240 V
144
10.1.2
Mains voltage 380-500 V
145
10.1.3
Overload capability
146
10.2 Vacon
®
100 HVAC - technical data
147
11 Technical data on control connections
152
11.1 Technical data on control connections
152
TABLE OF CONTENTS
VACON · 7
24-HOUR S358 (0)201 212 575 · EMAIL: [email protected]
