2
In IP21, cut free the opening on the cover of the AC
drive for the Ethernet cable.
In IP54, cut a hole in a grommet and move the
cable through it.
a
)
If the grommet folds in when you put the cable,
pull the cable back to make the grommet
straight.
b
)
The hole in the grommet must not be wider
than your cable.
c
)
Pull the first bit of the cable out of the
grommet so that it stays straight. If this is not
possible, make the connection tight with some
insulation tape or a cable tie.
IP21
IP54
CONTROL UNIT
VACON · 97
24-HOUR S358 (0)201 212 575 · EMAIL: [email protected]
6
