UTStarcom PLS7000, Phone Manual

Page: 32 / 171

22 Section 2A: Your Phone – The Basics
2.
Place the battery onto the phone, bottom first so the
tabs go into the bottom of the phone and the metal
connectors align. Then push the battery down until it
locks into place.
3.
Place the battery cover over the battery and slide into
place.
Note:
If the battery is not correctly placed in the compartment, the phone
will not turn on and/or the battery may detach during use.
Removing the Battery
To remove your battery:
䊳
Pull down the release latch, lift up the battery cover
and remove the battery from the phone.
Charging the Battery
Your phone’s LiIon battery is rechargeable and should be
charged as soon as possible so you can begin using your
phone.
Keeping track of your battery’s charge is important. If your
battery level becomes too low, your phone automatically
turns off and you will lose all the information you were just
working on. For a quick check of your phone’s battery level,
glance at the battery charge indicator located in the upper-
right corner of your phone’s display screen. If the battery
charge is getting too low, the battery icon
blinks and
the phone sounds a warning tone.