UTC Fire and Security Kidde AirSense SynaG Series, Installation Manual

Page: 94 / 104

Appendix A: Configuration presets
88 SynaG Series Installation Manual
Table 63: Expansion board sounder circuit configuration with EN 54-13 supervision
disabled
[1]
Display Events Output Delay
90 [2] Evacuation sounders 1 No
2 No
Warning sounders 3 No
4 No
91 Sounders
(Evacuation sounders
for NBN S 21-100)
1 No
2 No
3 No
4 No
92 [2] Warning sounders 1 No
2 No
3 No
4 No
[1] These presets are only available for supervised expansion boards.
[2] NBN S 21-100 only
Table 64: Expansion board zone configuration with EN 54-13 supervision enabled
Display Zone Outputs Delay Display Zone Outputs Delay
05 1 1 and 2 Yes 18 1 and 2 1 and 2 Yes
2 3 and 4 Yes 3 and 4 3 and 4 Yes
06 3 1 and 2 Yes 19 5 and 6 1 and 2 Yes
4 3 and 4 Yes 7 and 8 3 and 4 Yes
07 5 1 and 2 Yes 20 1 or 2 1 and 2 Yes
6 3 and 4 Yes 3 or 4 3 and 4 Yes
08 7 1 and 2 Yes 21 5 or 6 1 and 2 Yes
8 3 and 4 Yes 7 or 8 3 and 4 Yes
17 1, 2, 3 or
4 1 and 2 Yes
5, 6, 7, or
8 3 and 4 Yes
Table 65: Expansion board event configuration with EN 54-13 supervision enabled
Display Event Outputs Delay Display Event Outputs Delay
24 Alarm 1 and 2,
3 and 4 No 32 [2] Fire protection 1 and 2 No
Fault warning
output [3]
3
Fault [1], [5] 4
25 Fault 1 and 2 No 33 Buzzer on 1 and 2 No