22 |
Inner Glass Removal
The 5mm thick inner glass is ceramic. Handle glass with
care; breaking will result in a dangerous mess. Use a shop
vacuum to clean if a break occurs. All glass should be
handled with quality suction cups such as 50-3837. Two
suctions cups must be used for larger glass segments.
ONLY
the front inner glass needs to be removed for
firebox access. Remove side glass only if necessary. Side
glass uses adjustable back stops to maintain seal on
front glass. If side glass is removed be sure back stops are
adjusted correctly. Remove the front inner glass as follows:
1.
Remove outer glass
(see page 20).
2.
Remove louvers
(see page 21).
3.
Loosen the 3 knobs at bottom glass retainer.
4.
Loosen the 3 knobs at top of the glass retainer.
Retainer has slotted "dog-leg' profile, shift retainer
right-up-left to clear glass.
MAKE SURE retainer is in final position during
assembly for even sealing pressure.
5.
Attach
suction cup to
the glass ensuring
strong engagement.
6.
Allow glass to
fall forward some.
7.
Lift glass up until
bottom is higher than
fireplace edge.
8.
Swing glass bottom
outward, removing
it from the unit.
Maintenance and Service
Initial Setup
