| 23
Media Placement (Standard Unit)
The unit comes with a steel bezel and a measured amount
of vermiculite to cover the burner. Install media as follows:
1.
Remove outer glass
(see page 20).
2.
Remove louvers
(see page 21).
3.
Remove front inner glass
(see page 22).
4.
Evenly spread out vermiculite onto burner.
5.
Insert the steel bezel onto the burner
platform; make sure it's sitting flat.
6.
Add any additional options such as
rocks or logs and reassemble unit.
AIRFLOW
(DO NOT
BLOCK)
BURNER
CAUTION:
DO NOT BLOCK AIR SLOTS AROUND BURNER PERIMETER;
POOR FLAME WILL RESULT.
Media Placement (LED Unit)
The unit comes with a measured amount of clear diamond
glass to cover the burner and the burner platform. Install
media as follows:
1.
Remove outer glass
(see page 20).
2.
Remove louvers
(see page 21).
3.
Remove front inner glass
(see page 22).
4.
Evenly spread out clear diamond glass
onto burner and burner platform.
5.
Pat down media to create 1 even layer.
DO NOT block air flow to burner.
AIRFLOW
(DO NOT
BLOCK)
Initial Setup