24 |
Final Firebox Sealing
Sealing the firebox is essential for safety and proper flame
characteristics. The firebox requires liquid silicone at the inner
glass corners after initial set up is complete. Make sure all log
and media placement is satisfied before proceeding. Seal the
firebox as follows:
1.
Confirm fireplace log and media
placement
(see page 24).
2.
Reinstall front inner glass, ensure glass is sealed at the
corner edgeing. If not, massage silicone strip gasket - inner
side glass should not need adjustment. Test fire for 15 minutes
for an established flame and make adjustments if necessary.
3.
When unit has cooled, blob some clear high-temp silicone
(not included) around the 4 corners of the front glass. Make
sure you fill up any space between the glass and firebox.
SIDE
GLASS
FRONT
GLASS
SILICONE
GASKET
TOP OF GLASS VIEW
BOTTOM OF GLASS VIEW
Initial Setup
Framing and Installation
