74
•
Two Track Number Entry Methods
One of the two track number entry methods can be programmed for Item Track System.
For Amount Track System, the track number must always be entered manually.
1) Automatic Item Track Number Method (Item Track System Only)
If this method is programmed by [SF-15.a=0], Item Track is automatically assigned in sequential order by
pressing
ITEM TRACK #
key. The digit and value of track number are programmable (up to 9999999) by [SF-
14].
< Unique Automatic Track # [SF-14.a=1] >
Depending on programming [SF-14.a=1], the last two digits of the ECR machine number (ECR ID) are put to
the head of the automatic 1 ~ 5 digits item track number. This makes the item track number unique.
ITEM
TRK#
--- new Item Track number is automatically assigned
When a track is finally closed by a media key, that track number can not be used again. When a track number
goes up to a programmed maximum number, the next track number will begin from 1. At that time, track
numbers which are not closed will be skipped.
A table number (allocating where customers sit) can be assigned and the track can be picked up by the table
number under non-clerk interrupt system.
2) Manual Track Number Method (Item / Amount Track Systems)
The track is assigned by manually entering a random 1 ~ 7 digit track number with the depression of
ITEM
TRACK #
key or
AMOUNT TRACK #
key.
enter track # ---
ITEM
TRK#
--- new Item Track number is assigned
enter track # ---
AMT
TRK#
--- new Amount Track number is assigned
After a track is finally closed by a media key, the track number can be used again.
A table number assignment is available only for Item Track System under the clerk interrupt system is used but
the track
can not
be picked up by the table number. Although a table number can be entered and printed on a
receipt under the clerk interrupt system, but the table number is not memorized for Amount Track System.
