manualshive.com logo in svg

Uniwell PX-5700, Operation Manual

Share
Download
Uniwell PX-5700 Operation Manual Download Page 119

116

IX.

 

REPORTS

REPORT SEQUENCE

Control Key Position

Set the control key to 

X, Z1 or Z2 position

 and use the report sequence below;

-  1st level for daily report:

X (read only) position or Z1 (reset) position

-  2nd level for periodic report:

X (read only) position or Z2 (reset) position

For Z report issue and report format, there are some programming restrictions.  Refer to system function flags
[SF-26~29] and the clerk security function flags.

Report Selection Method

User friendly sequence is possible with usability of LCD display as follows:

1.

 

Turn the control key to X position.

2.

 

Enter the clerk ID and press 

CLERK ID

 key.

3.

 

Select REPORT and press 

ENTER 

key.

4.

 

Select the report from the list by 

ENTER

 key.

If you know the report number, enter the report number and press 

X2

 key.

5.

 

Press 

ENTER 

or 

TTL 25

 to issue the report.

Direct Number Entry Method

If you are familiar with the conventional report sequences which have been used by the conventional series, this
method is much faster than "Report Selection Method" to enter into the report sequence.

1.

 

Turn the control key to X position.

2.

 

Enter the report number, for example "1" for X-01 AUTO FULL TRANSACTION - 1st level report.

3.

 

Press 

X2 

key.

4.

 

Press 

ENTER 

or 

TTL 25

 to issue the report.

Summary of Contents for PX-5700















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands