117
Report Sequence
Full Report
<X or Z>--(report #)--[X2]--[ENTER/TTL 25]
or {select from the list}--[ENTER/TTL 25] or {select FULL REPORT and press [ENTER/TTL 25]}
Individual Report
<X or Z>--(report #)--[X2]--(*required #)--[
•
]--[TTL 25]
or {select from the list}--{select INDIVIDUAL REPORT}--(*required #)--[
•
/ENTER]--[TTL 25]
Sequential Report
<X or Z>--(report #)--[X2]--(*start #)--[X2 ([ITEM TRACK #] for #78 Customer Bill report)]--(*end #)--
[ENTER/TTL 25] or {select from the list}--{select SEQUENTIAL REPORT}--(*start #)--[X2 ([ITEM
TRACK #] for #78 Customer Bill report)]--(*end #)--[ENTER/TTL 25]
* required #, start/end #
Clerk report
Enter the sequential clerk number (not 4-digit clerk code) for clerk reports.
Group report
Enter the group number.
PLU report
HARD PLU key and Scanner can be used to enter PLU code.
Before entering PLU code, MENU SHIFT/PLU MODIFIER keys can be pressed if
required.
Track report
Enter the track number.
Customer file report
(#74)
Enter date (mmddyyyy or ddmmyyyy) indicated on full customer file report. It is
printed in "order of customer file programmed" or "descending order of last access
date if sorted by the sequence below.
Customer File Sort Sequence: <X>--[CUSTOMER FILE]
After the customer file is sorted, the order will not be returned.
Customer bill report
(#78)
(78)-[X2]--(start item track #)--
[ITEM TRACK #]
--(end item track #)--
[ENTER/TTL 25]
(78)-[X2]--(start date or date & time or time)--
[X2]
--(start date or date & time or
time)--[ENTER/TTL25]
date: mmddyy or ddmmyyyy [SF-7.f] Check date format on the front display.
date & time: mmddyyyyhhmm or ddmmyyyyhhmm
time: hhmm If you specify time only, it is considered as today's time.
Function program
dump report (#85)
Refer to the table shown on
page 119
.
Display
C.FILE SORT 100%
0007
Sort completed.
total number of customer files
