UNIVIEW OET-213H-NB User Manual Download Page 9

Page: 9 / 87

5.2

Main Interface

The main interface displayed on the face recognition terminal varies with the device type. See

Device Info

Figure 5-2

Main Interface

No.

Description

Displays the current date, time, and connection status of different services.

indicates the following items from left to right:



Whether to enable the face scan mode



Whether server 1 is online

NOTE!

An icon marked with

indicates "No".



Total: total number of detected people.



Normal: Number of people with normal temperature

This interface is only displayed when the temperature measurement function is enabled. For detailed
operation description, see

Advanced Setting

Displays the photo and name of an identified person in the library. Refer to

Recognition Result Display

enable the face recognition terminal to display one or more registered face pictures.

When

Multiple Faces

is selected, information about the latest person identified successfully, is displayed

on the left of the screen. The interface can display information about five recent persons identified
successfully at most.

Summary of Contents for OET-213H-NB
























































































Search results

Summary of Contents for OET-213H-NB

Reviews:

Related manuals for OET-213H-NB

Brands by name

Popular brands

UNIVIEW OET-213H-NB, User Manual

Search results

Summary of Contents for OET-213H-NB

Reviews:

Related manuals for OET-213H-NB

Brands by name

Popular brands