UNIVIEW OET-213H-NB User Manual Download Page 24

Page: 24 / 87

The terminal will automatically restart after the upgrade is completed.

NOTE!



The terminal only supports FAT32 USB drives with one partition.



Local upgrade is also supported. See

Software Upgrade

for details.

5.5.10

Data Management

Figure 5-20

Data Management Interface



Import library files from a USB flash drive

Save the library file to a USB flash drive.

Plug the USB drive into the terminal.

Click

to import the library file to the terminal.

The terminal will automatically restart and apply the new library after the import is completed.

NOTE!

The newly imported library will overwrite the original library in the device.



Export library files to a USB flash drive

Plug a USB flash drive with enough free space into the terminal.

Click

to export the library file to the USB flash drive.



Export temperature records to a USB flash drive

Plug a USB flash drive with enough free space into the terminal.

Select a time period of the records to be exported and whether to export snapshots.

Click

to export the temperature records to the USB flash drive.

Summary of Contents for OET-213H-NB
























































































Search results

Summary of Contents for OET-213H-NB

Reviews:

Related manuals for OET-213H-NB

Brands by name

Popular brands

UNIVIEW OET-213H-NB, User Manual

Search results

Summary of Contents for OET-213H-NB

Reviews:

Related manuals for OET-213H-NB

Brands by name

Popular brands