56
Card: The face recognition terminal conducts 1:N match on the acquired IC card numberand the
card numbers in the library.
Face: The face recognition terminal conducts 1:N match on the face snapshot photo and face
photos in the library.
Card+Face: The face recognition terminal conducts 1:N match on the acquired IC card number and
the card numbers in the library, and then conducts 1:1 match on the face photo corresponding to
the card number and the snapshot photo.
Password: The terminal allows users to enter correct "unit No.#room No.#room password" to
open the door.
An authentication mode is used to configure the method for people to pass through the terminal.
There are four authentication modes available in total. Users can select at least one but no more than
three authentication modes based on actual requirements. When multiple authentication modes are
adopted, the authentication modes are in an "OR" relationship, that is, the door is open when a person
passes the authentication in any of the modes.
Copying time ranges and authentication modes
After setting time ranges and authentication modes for Monday, if the same time ranges and
authentication modes are required for Tuesday to Sunday, select the check box in front of
Select
All
to copy them to all days.
If the same time ranges and authentication modes are required only for some days, select specific
days and click
Copy
.
(3)
Click
Save
to save the added check template.
Modifying a check template
To modify an existing check template, select it, modify desired parameters, and click
Save
to complete the
modification of the check template.
Deleting a check template
(1)
Choose
Setup
>
Intelligent
>
Check Template
and select the check template to be deleted.
(2)
Click
Delete
.
(3)
In the displayed confirmation box, click
OK
to delete it.
3. Time Template
You can set a time template to limit the time for people to go inside or outside. When a person is authenticated
outside the time template (arming time), "non-specified time" will be reported. The time template can be set by
week and a maximum of eight arming time ranges can be set for a day. Exception dates can be set separately but
only by day.
