UNIVIEW OET-213H-NB, User Manual

Page: 73 / 87

68
Parameter Description
Detection
Interval Time
The digital detection module detects temperatures at intervals, the
detection results within the interval time will be filtered.
The default value is 7s .
Health
question
Open The Door
Even When
Unexpected
Answer Detected
On: When the face recognition terminal detects an unexpected
answer, the door will open.
Off: When the face recognition terminal detects an unexpected
answer, the door will not open, and the visitor need to perform face
recognition and answer questions again or contact relevant
personnel on site.
The default value is Off .
Trigger Alarm
When
Unexpected
Answer Detected
On: The terminal will sound an alarm when it detects an unexpected
answer.
Off: The terminal will not sound an alarm when it detects an
unexpected answer.
The default value is On .
Visitor’s Name &
Snapshot
After this function is turned on, when a person has his face scanned,
his name and snapshot will be displayed on the GUI. If the person’s
information is not stored in the library, the GUI will only show his
snapshot.
The default value is Disable .
Question Set
Set health questions displayed on the screen when the face
recognition terminal performs face recognition and temperature
detection and your expected answer of Yes or No.
Up to 5 questions are allowed. Please set the questions based on
actual conditions.
Pop up Message
When
Unexpected
Answer Detected
After this function is turned on, when an unexpected answer is
detected, the terminal will display a pop-up message on the screen,
please wait for a few seconds to close it.
The default value is Off .
Temperature Measurement Timeout Strategy
After this function is turned on, when a person has the face scanned
and remained in the live view but not the temperature taken for 10s,
the GUI and the warning sound prompt temperature measurement
timeout.
The default value is On .
Alarm Output Configuration
High
Temperature
Alarm
After this function is turned on, the terminal will output a high
temperature alarm when it detects a high temperature.
The default value is Off .
Not Wearing
Mask Alarm
After this function is turned on, the terminal will output a not
wearing mask alarm when it detects a person not wearing mask.
The default value is Off .
Authentication
Failure Alarm
After this function is turned on, the terminal will output an
authentication failure alarm when face and card authentication
failed.
The default value is Off .
Mail Linkage Configuration
Please configure the email first
before using this function (see
E-
mail )
High
Temperature
After this function is turned on, the terminal will send a high
temperature alarm to the specified email address when it detects a
high temperature.
The default value is Off .
Not Wearing
Mask
After this function is turned on, the terminal will send a not wearing
mask alarm to the specified email address when it detects a person
not wearing mask.