28
(1)
Choose Setup > Common > Local Settings to go to the Local Settings interface.
(2)
The figure below shows the
Local Settings
interface. Modify parameters based on actual requirements by
referring to the table below.
Figure 7-12
Local Settings Interface
Table 7-2
Parameter Description
Area
Parameter
Description
Intelligent Mark
Untriggered Target
The configuration is not supported.
Video
Processing Mode
The options are as follows:
Real-Time Priority: Recommended if the network is in good condition.
Fluency Priority: Recommended if you want short time lag for live video.
Ultra-low Latency: Recommended if you want the minimum time lag for
live video.
When the network is in good condition,
Real Time Priority
is recommended.
If delay exists on the network,
Fluency Priority
is recommended. If it is
required that the live view delay should be lower than the real time priority,
Ultra-low Latency
is recommended.
Protocol
Set the protocol used to transmit media streams to be decoded by the PC.
The options are as follows:
UDP
TCP
Audio
Encoding Format
Audio encoding format on the client.
Recording and
Snapshot
Recording
Type of local recording subsection. The options are as follows:
Subsection by Time
:
Duration of recorded video for each recording file on
the computer. For example, 2 minutes.
Subsection by Size
:
Size of each recording file stored on the computer.
For example, 5M.
Subsection Time
(min)
This parameter is displayed only when
Recording
is set to
Subsection by
Time
.
The value ranges from 1min to 60min.
