16
NOTE!
The password must contain at least eight characters (including at least two of the following types: upper
case letters, lower case letters, digits, underscores, and hyphens).
The confirmation password must be consistent with the new password.
The activation password is consistent with the password for the
admin
to log in to the Web interface. If the
activation password is changed, use the new password to log in to the Web interface.
(3)
Tap
Save
to complete the activation password change.
5.5.6
Admin Password
On the Password-based Door Opening, users can enter an admin password to open the door. The admin password
is applicable to device managerial personnel (such as people in the management center).
The admin password is disabled by default. If you need to enable the admin password, tap
Yes
and enter
passwords in
Password
and
Confirm
.
NOTE!
The password must be a string of eight characters.
The confirmation password must be consistent with the password.
Figure 5-17
Admin Password Configuration Interface
5.5.7
Authentication Scene
This interface allows you to configure terminal authentication scenes, temperature measurement range,
temperature alarm value, and other data. The table below describes detailed configuration.