Universal Laser Systems PLS3.60 Safety, Installation, Operation, And Basic Maintenance Manual Download Page 53

Page: 53 / 116

ASSEMBLING THE PLS

Section 4-9

UTER OR THE

ASER SYSTEM CAN OCCUR AS WELL AS FILE TRANSMISSION PROBLEMS.

the USB port on

the side of the PLS.

Do not use a USB cable longer than 6 feet (2 meters).

this time”. Then click

“Next” to continue.

insert the Software Installation CD-

ROM.

ny way! The firmware will

begin to load.

USB 2.0 High Speed (only)

The laser system comes equipped with a high quality 6-foot USB cable. Please use this cable and do
not substitute it with any other. Connect the printer cable directly from your computers USB port to
the port in the rear of the laser system.

DO NOT USE ANY ADAPTERS, EXTENSION CABLES,

SWITCH BOXES, ZIP DRIVE, OR ANY DEVICE BETWEEN THE COMPUTERS USB PORT AND
THE PORT ON THE LASER SYSTEM OTHERWISE DAMAGE TO THE COMP
L

a. Connect the USB cable provided between the USB port of the computer and

b. After connecting the USB cord, the Found

New Hardware Wizard will open. You will be
asked if Windows should connect to the
Windows Update to search for software.
Select “No, not at

c. Select “Install the software automatically”.

Then Click “Next” to continue. You

DO NOT

need to

d. A message will appear, “The ULS PLS

Engraver Firmware Loader has not passed
Windows Logo testing”. Select “Continue
Anyway”. Do not be concerned. Installing
the ULS Firmware

WILL NOT

harm your

computer in a

Summary of Contents for PLS3.60





















































































































Search results

Summary of Contents for PLS3.60

Reviews:

Brands by name

Popular brands

Universal Laser Systems PLS3.60, Safety, Installation, Operation, And Basic Maintenance Manual

Search results

Summary of Contents for PLS3.60

Reviews:

Brands by name

Popular brands