manualshive.com logo in svg

Universal Laser Systems PLS3.60, Safety, Installation, Operation, And Basic Maintenance Manual

Share
Download
Universal Laser Systems PLS3.60 Safety, Installation, Operation, And Basic Maintenance Manual Download Page 35

GRAPHICS SOFTWARE SETUP 

Section 3-5 

 

Postscript (PS) Images 

The laser system is NOT a postscript device.  This means that postscript fills, postscript textures, and 
especially POSTSCRIPT FONTS WILL NOT be able to print to the laser system.  Sometimes using 
Adobe Type Manager (ATM) will allow some postscript fonts to print correctly but most of the time it does 
not work properly. 
 

Helpful Tip 

If you are having any problems printing a font and you cannot figure out what is going on, select the font 
and “convert to curves” or “convert to paths” in your graphics software.  This will convert the font into a 
bitmapped image and will print correctly to the laser system.  Refer to your graphics software on how to 
convert fonts.  However, postscript textures and postscript fills cannot be converted and will not print to 
the laser system. 
 
 

Specific Software Setup 

Some graphics software programs require a special setup procedure in order for the software to function 
correctly with the ULS printer driver.  In the following pages you will find setup instructions for the most 
popular software programs that our customers use.  If you are having trouble with other software 
programs not included in this document, you may want to switch to one of them.  As a reminder, ULS 
provides no warranties whatsoever on any software used in connection with a ULS Laser Engraving 
System, express or implied. Neither does it guarantee software compatibility with any off-the-shelf 
software package or any software program that has not been written by ULS. 
 

 

 

Summary of Contents for PLS3.60





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands