Universal Laser Systems PLS3.60, Safety, Installation, Operation, And Basic Maintenance Manual

Page: 3 / 116

Introduction
We would like to thank you for your laser system purchase. Universal Laser Systems, Inc. (ULS) is the
pioneer, and highest volume manufacturer, of large field, computer controlled laser engraving, marking,
and cutting systems. ULS has devoted years of research and development to further the quality of our
products that has resulted in a number of remarkable innovations within the laser industry. Since 1988,
the staff at ULS has been dedicated to total customer satisfaction. When you buy Universal you get more
than a laser - you get a team of talented, experienced, enthusiastic people who are focused on your
satisfaction. Our commitment is to help you now and in the future.
To begin with, we highly recommend that this entire manual be read before attempting to use your laser
system. The manual includes important information about safety, assembly, use, and basic maintenance.
How To Get Help
Before contacting our Technical Support Department, make sure that you have read this entire manual as
well as any other accompanying manuals included with your laser system.
Step 1:
Try to recreate the problem and write down the circumstances in which the problem occurred. Try to
recall if the problem began all of a sudden, worsened over time, or began after you performed any recent
maintenance. Also be prepared to describe all pertinent information about the computer being used such
as software, ULS printer driver version, computer operating system and computer type.
Step 2:
Make sure that you have the serial number of the laser system available. The serial number tags are
located on the back of the machine, next to the exhaust port, and inside the front door, visible when you
open it. The Technical Support Department may not be able to assist you without this number.
Step 3:
Contact your local ULS Representative. They may have more details about your particular installation and
applications. If possible, call from a phone that is close to the laser system so that it can be operated
while talking to our representative.
Step 4:
If your local Sales Representative cannot assist you and you would like to use our FREE , email based
support system, log on to our website: www.ulsinc.com . Click on the “Technical Support“ link, then click
on the “Technical Support Request Form” and follow the instructions.
Step 5:
If you are unable to obtain Internet access, you may contact our Technical Support Department at:
Universal Laser Systems, Inc.
Technical Support Department
16008 North 81
st
Street
Scottsdale, AZ 85260
Phone: 480-609-0297
Fax: 480-609-1203
M-F 8am – 5pm Arizona Time
support@ulsinc.com