Universal Laser Systems PLS3.60, Safety, Installation, Operation, And Basic Maintenance Manual

Page: 11 / 116

SAFETY
Section 1-3
•
The user door(s) are safety interlocked and will disable the CO2 laser beam from
firing when the user door(s) are opened. The Red Dot Pointer is NOT safety
interlocked and can be automatically activated with the door(s) either open or
closed.
•
DO NOT OPERATE THE LASER SYSTEM IF ITS SAFTEY FEATURES HAVE
BEEN MODIFIED, DISABLED OR REMOVED.
This may lead to accidental
exposure to invisible and visible CO2 laser radiation which may cause permanent
blindness and/or severe burns to your skin.
Safety Labels
CDRH and CE regulations require that all laser manufacturers affix warning labels in specific locations
throughout the equipment. The following warning labels are placed on the laser system for your safety.
DO NOT remove them for any reason. If the labels become damaged or have been removed for any
reason, DO NOT OPERATE the laser system and immediately contact Universal Laser Systems, Inc. for
a free replacement. Labels are NOT to scale.
Model No:
Serial No: Made in USA
Manufactured:
Laser Processing System Manufactured By:
Scottsdale, Arizona
LASER SYSTEMS INC.
XXX XXXX
XXXXX
XXX XXXX
SERIAL #: XXXXX
DATE: XXXXX
221-0002-0 221-0007-0
WARNING
NEVER OPERATE THE LASER SYSTEM
WITHOUT CONSTANT SUPERVISION
EXPOSURE TO THE LASER BEAM MAY
CAUSE IGNITION OF COMBUSTIBLE
MATERIALS WHICH CAN CAUSE SEVERE
DAMAGE TO THE EQUIPMENT
!
WARNING
THIS LASER SYSTEM CONTAINS A
CO LASER IN A CLASS I ENCLOSURE.
THE LASER SYSTEM HAS BEEN
CLASSIFIED AS CLASS 3R DUE
TO THE PRESENCE OF A
VISIBLE LASER DIODE.
2
221-0012-0 221-0013-0
THIS EQUIPMENT CONFORMS
TO PROVISIONS OF
US 21 CFR 1040.10
AND 1040.11
CAUTION
CLASS 4 INVISIBLE LASER RADIATION
AND INTERLOCK FAILED OR
AVOID EYE OR SKIN EXPOSURE
DIRECT OR SCATTERED RADIATION
WHEN OPEN
DEFEATED
TO
221-0015-0 221-0016-0