Unitronics electric UM2B, User Manual

Page: 37 / 109

5.- SOFTWARE DESCRIPTION
- 35 -
- FUNCTION:
The function of the transformer within the installation.
- PLACE:
The name of the installation (e.g., Brighton thermal power plant) is selected
from a list. If the facility in question does not appear, a new one may be input
using the
“other...”
option.
- TECHNICAL LOCATION:
The location of the machine within the facility (e.g., pump house) is selected
from a list. If the location in question does not appear, a new one may be
input using the
“other...”
option.
- USER:
The name of the operator performing the test is selected from a list. If the
operator in question does not appear, a new one may be input using the
“other...”
option.
- INSTRUMENT (UM2B):
Serial number of the UM2B with which the test is performed.
- DATE (DD-MM-YY):
Date of the test. The program checks that this date is correct.
In all those fields in which new items may be added to a list, it is also possible to
delete them by locating the mouse cursor over the item in question and clicking with the
right-hand button (Figure 5-10).
The introduction of all these data is obligatory; in other words, all the data should be
correctly input for the program to allow the process to continue.
Figure 5-10: Warning for manufacturer’s name elimination.
The MANUFACTURING No, MANUFACTURER and MACHINE TYPE fields
are part of a test search function ; in other words, if any test has been previously performed
on the machine in question and any of these fields is filled in, the program will automatically
fill in the rest (case of MANUFACTURING No) or limit the number of possible cases (see
also section 5.4.1).