United States Stove Company SP1000E, Manual

Page: 64 / 188

Run Data.xlsm
Client
Model:
Tracking #:
Run:
Equations and Sample Calculations – ASTM E2779 & E2515
Equations used to calculate the parameters listed below are described in this appendix. Sample
calculations are provided for each equation. The raw data and printout results from a sample run are
also provided for comparison to the sample calculations.
USSC
SP1000
1
149
M
Bdb
– Weight of test fuel burned during test run, dry basis, kg
M
BSidb
– Weight of test fuel burned during test run segment
i , dry basis, kg
PM
F
– Average particulate emission factor for full integrated test run, g/dry kg of fuel burned
Q
sd
– Average gas flow rate in dilution tunnel, dscf/hr
V
m(std)
– Volume of Gas Sampled Corrected to Dry Standard Conditions, dscf
m
n
– Total Particulate Matter Collected, mg
C
s
- Concentration of particulate matter in tunnel gas, dry basis, corrected to STP, g/dscf
E
T
– Total Particulate Emissions, g
BR – Average dry burn rate over full integrated test run, kg/hr
BR
Si
– Average dry burn rate over test run segment
i , kg/hr
V
s
– Average gas velocity in the dilution tunnel, ft/sec
PR - Proportional Rate Variation
PM
R
– Average particulate emissions for full integrated test run, g/hr
PFS-TECO
Page 1 of 18