United States Stove Company SP1000E, Manual

Page: 10 / 188

Project # 23-114 Model: SP1000E
Page | 10
Appliance Description
Model(s): SP1000E
Appliance Type: Pellet-Fired Room Heater
Additional Models: Certification testing was performed on the model SP1000E. This
model series is branded under a several different names, including the KP1000E,
AP1000E , and the US1000E. Models under these various brand names utilize the same
basic design with respect to performance and emissions controls. All models listed above
are presumed to have the same emissions performance as the test specimen provided
for certification testing.
Air Introduction System: A variable speed combustion fan forces air into the firebox
through holes in the bottom of the firepot.
Combustion Control : A control panel on the side of the unit is used to select burn rates,
which are varied by automatic modulation of the combustion fan and feed system. An
automatically controlled distribution bower is also installed.
Fueling System: An inclined auger driven by a gear motor, meters pellets through a drop
tube (over feed) to a fire pot in the firebox.
Baffles : N/A
Flue Outlet: Venting is through a 3" diameter steel pipe, which exits through the back of
the unit. The
unit is designed for optional connection to a 6” flue.
Appliance Dimensions
SP1000E Dimensions
Height Width Depth
Firebox
Volume
30.5
”
26
”
24
”
N/A
– Pellet
Stove
Appliance design drawings can be found in Appendix D submitted with the CBI copy of
this report.