![background image](http://html1.mh-extra.com/html/unit/ucj-411/ucj-411_instruction-manual_3978699004.webp)
ENGLISH
4
ASSEMBLE
•
Place the Filter Base (D) on the top of the Motor Unit (F).
•
Make sure to lock the Filter Base (D) by rotating it anti-clockwise and go as far as it can.
•
Put the Stainless Steel Grater / Filter (C) in the Filter Base (D). Make sure the Stainless Steel
Grater / Filter (C) is seated on the Gear (H).
•
Place the Cover (B) onto the Stainless Steel Grater / Filter (C).
•
Make sure the Safety Cover Lock is locked into the Locking Slot by rotating it anti-clockwise and go
as far as it can.
•
Slide the Pusher (A) down the feed chute by aligning the groove in the Pusher (A) with the small
protrusion inside the feed chute.
•
Attach the Pulp Container (E) under the Cover (B).
•
Place the Juice Container (I) under the spout.
OPERATING INSTRUCTION
1. When using for the first time, remove all packing materials and wash the parts with warm soapy
water. Rinse and dry thoroughly.
2. Always make sure the appliance is properly and completely assembled before operating.
3. Wash the fruit or vegetables and cut them into pieces that fit into the feed chute. Most fruit and
vegetables such as apples, carrots and cucumbers will not need to be cut to size as these will fit
into the extra large feed chute of this juicer.
–
For fruits with hard or inedible skins such as melons, mango and kiwi fruit, always peel before
juicing.
–
Some fruit may have stones such as nectarines, peaches, apricots, plums and cherries must
be removed the stones before extracting.
–
A small amount of lemon juice can be added to apple juice to prohibit browning.
4. Ensure to place the Juice Container (I) under the spout while juicing.
5. Put the plug into a 230 V, 50 Hz power outlet.
6. Switch the appliance on by pressing the On/Off Switch (G) to position “I” to start operation.
7. With the motor running, place food down the feed chute. Use the Pusher (A) to push food down the
feed chute. Never use your fingers or other utensils.
8. Juice will flow out from the spout. Collect the juice with the Juice Container (I). The separate pulp
will accumulate in the Pulp Container (E).
UCJ-411 Inst 6/9/08 6:10 PM Page 4