Unipulse TM500, Operation Manual

Page: 4 / 165

CAUTION
III
CAUTION
● Use the TM500 as it is incorporated in a control panel, etc.
●
Do not install in the following environments.
- Where the temperature/humidity exceeds the range of the specifications.
- Locations subjected to drastic temperature fluctuations or icing and condensing;
- Outdoors, or where the altitude exceeds 2000m.
- Places exposed to direct sunlight
- Dusty places
- Poor-ventilated places
- Places containing large quantities of salt or iron powder.
- Where the main body is directly affected by vibrations or shocks.
● Take adequate shielding measures when using at the following locations.
- Near a power line.
- Where a strong electric field or magnetic field is formed.
- Where static electricity, relay noise or the like is generated.
● Install as far away as possible from equipment generating high frequency, high voltage,
large current, surge, etc. Perform wiring of cables separately from these power lines. Do not
perform parallel wiring and identical wiring.
●
Do not use the product if damaged.
●
Tighten the screws for the signal input/output terminals at the specified torque.
If they are loose, shorts, fire or malfunctions may occur.
Tightening torque: 0.5N•m
●
For external inputs/outputs, RS-232C and options, use shielded cables.
●
The temporary overvoltage applied to the power should not exceed 1500V.
● For turning on/off the power, be sure to keep intervals of 5 seconds or more.
●
Use after warming up for 30 minutes or longer following the startup of power supply.
● If the TM500is not used by the specified method, its protective performance may be
impaired.
● Maintenance
- When performing maintenance, disconnect the power.
- Do not wipe with a wet rag, or with benzine, thinner, alcohol, etc. Doing so may cause
discoloration or deformation of the TM500. In the case of heavy contamination, wipe off
the contamination with a cloth after dipping it into a diluted neutral detergent and wringing
it well, and then wipe with a soft, dry cloth.
This sign forewarns the presence of hazards
that could result in personnel injury or property damage
when incorrectly handled.
Caution on installation
Caution on wiring
Caution during startup and maintenance