Unipulse TM500, Operation Manual

Page: 47 / 165

4 SETTINGS AND CALIBRATIONS
38
Chapter
4
SETTINGS
AND CALIBRATIONS
4-3.
X-axis setting
Calibrate and set the rotary encoder by X-axis Setting. Set each item according to the setting order.
Settings vary depending on whether the X-axis represents time or displacement.
Operation
Main screen → Setting → First Setting → X-axis Setting ( → Next → Next)
1.
Time/Displacement Change
Select whether the X-axis represents time or displacement.
When using the rotary encoder, select displacement, continuous
or average.
Setting range
Time: Load relative to time is wave-formed.
Displacement: Load relative to displacement is wave-formed.
Continuous: Load relative to displacement is repeated and wave-formed
until the measurement stops.
- Waveform reference is front only.
- Hold setting and Relative Comparison are invalid.
- Measurement Waveform Preservation by the Automatic Operation
preserves only waveforms upon completion.
- It can be repeated up to a maximum of 99 times.
Average: Load relative to displacement is repeated and wave-formed on
simple average until the measurement stops.
- Waveform reference is front only.
Operation
- It can be repeated up to a maximum of 99 times.
Main screen
→
Setting
→
First Setting
→
X-axis Setting
→
Time/DPM Change
X-axis: Time
X-axis: Displacement, Continuous, Average