Unipulse TM500, Operation Manual

Page: 98 / 165

5 COMMUNICATIONS
89
Chapter
5
COMMU
N
ICATIONS
- Set value write command (Work Setting)
Example: Writing “1000” to Y-axis Start Point, Display Range Setting, Work No. 10, Work Setting
① Writing “10” to Work No.
②
Writing “1000” to Y-axis Start Point after Work No. is written normally
Host
(Transmission to the TM500)
Item No. (See the list of set value commands.)
Work No. in the example
Item group (See the list of set value commands.)
Work Setting in the example
0 0 + 0 0 0 0 0 1 0 W 1 0 Delimiter
Data to write
“10” in the example
TM500’s return
(In normal processing)
Command received by the TM500
Header (If there is no header, no data will result.)
（
STX
）
Delimiter 0 0 W 0 0 1 0 + 0 0 0 0 1
（
STX
）
Delimiter N 1 G
TM500’s return
(In abnormal condition)
Header (If there is no header, no data will result.)
NG No.
1: Receipt of a statement different from the command format
2: Attempt to write a set value outside the setting range
4: Attempt to write a set value through communications
during measurement
5: Attempt to write while protecting
TM500’s return
(In normal processing)
Command received by the TM500
Header (If there is no header, no data will result.)
（ STX ） Delimiter 1 0 W 2 0 1 0 + 0 0 0 0 0
Host
(Transmission to the TM500)
Item No. (See the list of set value commands.)
Y-axis Start Point in the example
Item group (See the list of set value commands.)
Display Range Setting in the example
0 0 + 0 0 0 0 1 0 0 W 1 2 Delimiter
Data to write
“1000” in the example
（ STX ） Delimiter N 1 G
TM500’s return
(In abnormal condition)
Header (If there is no header, no data will result.)
NG No.
1: Receipt of a statement different from the command format
2: Attempt to write a set value outside the setting range
4: Attempt to write a set value through communications
during measurement
5: Attempt to write while protecting