UniPOS
Fire Control Panel FS5200
Instruction manual
Page 22
Revision 8/07.17
of 69
Fault in a controllable output:
(
The field “ЕEЕ” contains the number of the faults;
“NN” contains the number of the controllable output in
fault condition;
“Status” contains the state of the controllable output, i.e.
the type of the fault)
Fault in mains supply:
(The field “ЕEЕ” contains the number of the faults)
The backlight of the LCD display is extinguished and will
only illuminate if a button is pressed. 20s after the last
time the button is pressed is extinguishes again.
Fault in backup battery supply:
(The field “ЕEЕ” contains the number of the faults)
Fault in Auxiliary supply of external devices in Basic
Module
– a fuse is activated:
(The field “ЕEЕ” contains the number of the faults)
Short circuit in grounded wire:
(The field “ЕEЕ” contains the number of the faults)
Fault in the positive supply of the lines in Basic module
(The field “ЕEЕ” contains the number of the faults)
Fault in the positive supply of the lines in Additional
module:
(The field “ЕEЕ” contains the number of the faults)
Fault in the negative supply of the lines in Basic module:
(
The field “ЕEЕ” contains the number of the faults)
Fault in the negative supply of the lines in Additional
module:
(The field “ЕEЕ” contains the number of the faults)
Duty 17:05:34
Flt:ЕEЕ Flt NgPower2
Duty 17:05:34
Flt:ЕEЕ Flt NgPower1
Duty 17:05:34
Flt:ЕEЕ Flt LnPower2
Duty 17:05:34
Пвр:ЕEЕ Flt LnPower1
Duty 17:05:34
Flt:ЕEЕ Flt Earth
Duty 17:05:34
Flt:ЕEЕ Flt AuxPower
Duty 17:05:34
Flt:ЕEЕ Flt Battery
Duty 17:05:34
Flt:ЕEЕ Flt Mn Power
Duty 17:05:34
Flt:ЕEЕ cONN Status
