UniPOS
Fire Control Panel FS5200
Instruction manual
Page 44
Revision 8/07.17
of 69
If all four phone numbers are erased, the modem will not be able to connect if an event is
registered by the control panel.
06 Language:
(The field
“ХХХХХХХХХ” contains the language for the text
message
– Bulgarian, English or Russian)
14.3.3. Menu
Adjustment of controllable outputs
Select the menu from the screen:
The menu allows the user to trigger each of the available
controllable outputs for setup purposes. When you enter the menu
the cursor is positioned over the line of Controllable output 1 and no
controllable output is active:
When you press button
the controllable output on the selected line will be activated.
Simultaneously the inscription “No” changes into “Yes”. When you press the same button once again,
the controllable output will be deactivated and the inscription changes to “No”.
To move the cursor between the lines use buttons
and
. If activated controllable
output is available at the same time it will be deactivated.
To deactivate the function use button
. If activated controllable output is available at the
same time it will be deactivated.
14.3.4. Menu
Adjustment of relay outputs
Select the menu from the screen:
The menu allows the user to trigger each of the available relay
outputs for setup purposes. When you enter the menu the cursor is
positioned over the line of Relay output 1 and no relay output is
active:
When you press button
the relay output on the selected line will be activated.
Simultaneously the inscription “No” changes into “Yes”. When you press the same button once again,
the relay output will be deactivated and the inscription changes to “No”.
To move the cursor between the lines use buttons
and
. If activated relay output is
available at the same time it will be deactivated.
To deactivate the function use button
. If activated relay output is available at the same time
it will be deactivated.
> Set Parameters <
> Relays <
Relay 01 No_
Relay 02 No
> Set Parameters <
04 Relay
05 Default param
> Set Parameters <
> Ctrl Outs <
Ctrl Out 01 No_
Ctrl Out 02 No
> Set Parameters <
03 Ctrl Outs
04 Relays
> Set Parameters <
> Fire Panel <
Language ХХХХХХХХХ_
