UniPOS
Fire Control Panel FS5200
Instruction manual
Page 42
Revision 8/07.17
of 69
09 Menu Controllable outputs in Fire condition stage II in the
line
Select the menu from the screen:
The menu contains 1 or 2 parameters depending on the
available controllable outputs. The parameter pointed by the
cursor will be changed. To move between the parameters
use button
; to change a parameter use button
.
When the field
“ХХ” contains ”No” the controllable output will not be activated in Fire condition
stage II; when the field contains “Yes”, the controllable output will be activated.
10 Menu Relay outputs in Fire condition stage I in the line
Select the menu from the screen:
The menu contains 2, 10 or 18 parameters depending on
the available relay outputs in this particular configuration.
The parameter pointed by the cursor will be changed. To
move between the parameters use button
; to change
a parameter use button
.
When the field “ХХ” contains ”No” the relay output will not be activated in Fire condition stage
I; when the field contains “Yes”, the relay output will be activated.
11 Menu Relay outputs in Fire condition stage II in the line
Select the menu from the screen:
The menu contains 2, 10 or 18 parameters depending on
the available relay outputs in this particular configuration.
The parameter pointed by the cursor will be changed. To
move between the parameters use button
; to change
a parameter use button
.
When the field “ХХ” contains ”No” the relay output will not be activated in Fire condition stage
II; when the field contains “Yes”, the relay output will be activated.
Relay output 1 will always be activated in Fire condition stage II and thus it is not accessible
for changes.
12 Text message for the line:
(The
field
“ТТТТТТТТТТТТТТТТТТТТ contains text
message.)
At first the cursor is positioned over first symbol of the
message. To move the cursor use button
; to change
a symbol use button
.
> Set Parameters <
> Line NN <
Message
ТТТТТТТТТТТТТТТТТТТТ
> Set Parameters <
> Line NN <
F2 Relay 02 ХХ_
F2 Relay 03 ХХ
> Set Parameters <
> Line NN <
11 Relay F2
12 Message
> Set Parameters <
> Line NN <
F1 Relay 01 ХХ_
F1 Relay 02 ХХ
> Set Parameters <
> Line NN <
10 Relay F1
11 Relay F2
> Set Parameters <
> Line NN <
F2 Ctrl Out 01 ХХ_
F2 Ctrl Out 02 ХХ
> Set Parameters <
> Line NN <
09 Ctrl Outs F2
10 Relays F1
